A Denim Manufacturer, Not a Trading Company
A denim manufacturer in Xintang with cutting, sewing, washing and finishing on one site: OEM and private label denim from 300 pcs, with an audit checklist.

The difference between a manufacturer and a trading company is visible on a factory visit in about twenty minutes: a trader shows you a sample room, a manufacturer shows you the cutting table, the laundry drums and the metal detector.
We cut, sew, wash and finish denim in one building in Xintang, which means a wash correction is a walk across the yard, not a truck to a subcontractor.
This page is the checklist we would use ourselves if we were buying.
See the floor itself on our denim factory page — the equipment, the daily capacity and how to book a walk-through.
- 12,000 m² in Xintang: cutting, six sewing lines, four laundry lines, finishing
- 180 staff, 80,000 pcs a month, 12 wash recipes developed in-house
- OEM, private label and full-package from 300 pcs per style
Every step below is on our own floor. Nothing is sent out for washing or finishing.
- Cutting: 8-layer cutting table, marker made for your size nest, 4-point fabric inspection
- Sewing: Six lines, 180 staff, Tex-60 on stretch and Tex-80 on rigid, in-line checks
- Laundry: Four lines, 12 stock recipes, PPM 300–600 per drum, colour measured against the approved standard
- Finishing: Trimming, hardware check, metal detection, pressing, packing
- Quality: AQL 2.5 final inspection, measurement report per size, fault photos before sealing
- Certificates: OEKO-TEX Standard 100 yarns, GRS-certified recycled cotton available on request
How to audit a denim factory in one visit
Walk the flow in order: fabric store, cutting, sewing, laundry, finishing, packing. A factory that cannot show you all six in sequence is either subcontracting or hiding a stage. Ask these questions at each stop.
Fabric store
- Is the roll tagged with a dye lot and a weight, or is it loose?
- Is there a 4-point inspection record for the lot you would be cutting?
Cutting
- How many layers is the table rated for, and how is the marker nested?
- Is the cut ticketed per style and per size, or per bundle?
Sewing
- How many lines, and what is the changeover time between styles?
- Who checks the first off the line, and what is written on the check sheet?
Laundry
- How many recipes are held in-house, and how is shade measured?
- What is the drum load (PPM) for the wash you are buying?
Finishing
- Is there a metal detector, and is it tested at the start of each shift?
- Who signs the final inspection, and can you see a fault photo report?
We will walk you through all six stops on video or in person, and we hand over the inspection report with every bulk shipment. For the buying side of the same question, read working with a jeans manufacturer in China.
OEM: you send a tech pack and a size chart, we cut to it and ship under your label. The pattern stays on file for reorders.
Private label: you choose from our live fits and washes, we add your labels, patches and packaging. Fastest route to a first order.
Full package: we develop the wash, source the fabric, produce and pack to a retail-ready standard, including photography samples.
- OEM: your block, your grade rule, 300 pcs per style
- Private label: 40+ live styles, 12 stock washes
- Full package: development, production and retail packing

Short answers, with the number attached.
Do you subcontract the washing?
How many wash recipes do you hold?
What is your metal detection policy?
Which certificates can you show?
Send three questions you would ask any denim manufacturer. We answer in writing, with the numbers, within 12 working hours.
What is the difference between a denim manufacturer and a trading company?
A manufacturer owns the cutting table, the sewing lines and the laundry. A trading company owns none of them and marks up the factory price. Ask to see the laundry drums; a trader cannot show you any.
Can I visit the factory before ordering?
Yes, in Xintang, Guangzhou. We ask for two working days' notice so the line you want to see is running. A video walk-through of the same six stops is available the same day for buyers who cannot travel.
Do you make private label denim for small brands?
Yes, from 300 pcs per style per colour. Private label is the fastest route: pick a live fit and a stock wash, add your label and packaging, and skip the pattern development round.
Which certifications do you hold?
OEKO-TEX Standard 100 yarns, GRS-certified recycled cotton on request, and a documented AQL 2.5 inspection process. Certificate copies are sent with the quotation.
How long does a full-package order take?
10–14 days for wash and sample development, then 25–35 days for bulk after PP approval. A full-package order with a new wash is typically 45–50 days door to door.
Tell us what you want to make
Share the style, target quantity and launch date. You get fabric options, wash recommendations, a sampling date and a factory-direct quote — usually within 12 working hours.