Men's Denim Shorts Cut to an Inseam You Choose
Men's denim shorts from 300 pcs per style: 7, 9 and 11-inch inseams in 10–13 oz denim, shrink-corrected and sampled in 7–10 days.

Shorts hide their faults in a sample and reveal them after one wash. A 2% length shrink turns an 11-inch inseam into a 10.5, and the hem that cleared the knee in the fitting room now sits above it. Two centimetres is enough to change the product.
We cut men's denim shorts with the wash shrink already in the pattern, so the finished garment measures the inseam on your tech pack rather than the greige length we started from. Every inseam is measured at the crotch seam before packing.
- Inseams: 7, 9, 11 and 13 inch, plus a 5-inch swim-short length
- Cloth: 10–13 oz rigid, 9.5–11 oz stretch, raw or washed
- MOQ 300 pcs per style per color; bulk in 25–35 days
Three production patterns with the inseam and leg opening held as separate spec lines.
11-Inch Shorts
12 oz rigid, 11-inch inseam, 24 cm leg opening, clean hem, 5-pocket.
Baggy Jorts
12.5 oz rigid, knee length, 30 cm leg opening, raw or clean finish.
Cargo Shorts
11 oz cotton twill-denim, side cargo pocket, 9-inch inseam, drawcord waist.
Inseam is measured from the crotch seam on the finished garment, after wash, not from the pattern.
- Fabric: 100% cotton rigid, cotton/elastane, cotton/poly, cotton twill
- Weight: 9.5–11 oz stretch, 10–13 oz rigid, 12 oz raw selvedge
- Inseam: 5, 7, 9, 11 and 13 inch, tolerance ±0.5 cm
- Leg opening: 22 cm to 30 cm flat across the hem
- Rise: Mid 27 cm, high 30 cm at size 32 waist
- Hem finish: Clean single-fold, raw with a stay stitch, or rolled and bar-tacked
- Stitching: Tex-80 topstitch, bar-tacked pocket mouths and fly ends
- Hardware: Nickel-free brass shank, 15 mm rivets, YKK #4 metal zip
- Wash options: Rinse, stone, enzyme, acid, bleach, destroy, overdye
- Sizes: 28–44 waist, S–2XL, EU 44–58
- MOQ: 300 pcs per style per color
- Sampling: 7–10 working days, 10–14 with new wash development
Three details decide whether a short reads as tailored or as cut-off jeans: the hem treatment, the pocket bag depth, and where the side seam lands against the hem. We cut the pocket bag 2 cm shorter than a full-length jean so it never peeks below the hem line.
A raw hem needs a stay stitch and a 1 cm overlock inside, or it unravels into a fringe after four washes. Rolled hems need a bar-tack at each side seam; without it the roll opens in the first wear.
- Hem: clean, raw, rolled or frayed, each with its own stitch sequence
- Pocket: 2 cm shallower bag, bar-tacked mouth, no lining show-through
- Hardware: 15 mm rivets, shank button, zip length matched to the short fly
- Wash: heavy destroy needs a longer hem allowance, cut before washing

Four references from production: knee length, a raw hem, a cargo pocket and a stacked jort.




Shorts are an inseam business
Men's shorts buyers are mostly streetwear labels, marketplace sellers and resort or surf brands. They order two lengths of one pattern rather than two patterns, because the block above the knee is identical and only the leg below changes. That saves a pattern cost and keeps the fit consistent across the range.
The failure that shows up in reviews is length after washing. A 12 oz rigid short can lose 1.5–2% of its inseam in a stone wash, so an 11-inch style arrives at 10.7 and reads as a different product on a tall customer. The second fault is a hem that curls: a single-fold hem on a curved leg opening needs a 1 cm fold and a topstitch, or it lifts at the side seam after three washes. Both are cheap to prevent at sampling and expensive to explain in a product review.
- Specify the finished inseam and let us add the wash allowance.
- Choose the hem treatment before the wash, not after.
- Approve the length on a model who is tall for your market.
What inseam lengths do you make for men's shorts?
5, 7, 9, 11 and 13 inch as standard, measured on the finished garment. Most orders take a 9-inch and an 11-inch from the same block, which keeps the fit identical and only changes the leg below the knee. The two lengths share one pattern, so there is no second sampling fee.
How much do denim shorts shrink in the wash?
A stone or bleach wash pulls 1.5–2% of the inseam, so 11 inches becomes about 10.7 inches. We cut the pattern with that allowance, then measure the first 50 pcs against your chart before the run continues. The same allowance applies to the hem and the waist.
Can you make shorts with a raw hem?
Yes, with a stay stitch and an overlocked inside edge so it frays 3–5 mm and stops. Without those two steps the hem unravels into a 2 cm fringe after the first wash, which is a defect rather than a design detail.
Do you supply shorts in stretch denim?
Yes, 9.5–11 oz with 1–2% elastane. Stretch suits a slim 7-inch short; for a baggy jort we recommend 12–12.5 oz rigid because the volume holds its shape past 20 wears instead of collapsing at the hem. At 300 pcs the price difference between the two cloths is small.
What is the minimum order for men's denim shorts?
300 pcs per style per color, the same as jeans. A short uses roughly 60% of the fabric of a full-length jean, so the unit price at 300 pcs is lower than a jean in the same cloth and wash recipe.
Tell us what you want to make
Share the style, target quantity and launch date. You get fabric options, wash recommendations, a sampling date and a factory-direct quote — usually within 12 working hours.