A Denim Factory You Can Walk Through Before You Wire a Deposit
Walk our denim factory in Xintang, Guangzhou: an 8-layer cutting table, six sewing lines, four wash lines and metal detection in one 12,000 m² site.

The factory is in Xintang, Zengcheng District, Guangzhou — the denim cluster that has supplied Chinese jeans for three decades.
Cutting, sewing, washing and finishing all happen inside one 12,000 m² building, so a wash correction is a walk across the yard rather than a truck to a subcontractor.
Production starts at 300 pcs per style per colour, and you are welcome to walk the floor before you send a deposit.
- 8-layer cutting table, six sewing lines, four laundry lines, metal detection
- 80,000 pcs a month, about 3,000 pcs on a working day
- Fabric stock held at 9–14.5 oz for first orders and reorders
What you will see on the floor
Walk the flow in order and the factory explains itself: fabric store, cutting, sewing, laundry, finishing, packing. Nothing in that sequence leaves the building.
If you want the contracting side of the same story — how OEM and private label orders are structured, and what an audit checklist should ask — read our denim manufacturer page. If you are still working out how a first China order is priced, scheduled and audited, start with working with a jeans manufacturer in China.
Equipment by station
- Cutting: an 8-layer cutting table, a marker nested per size run, and a 4-point inspection of every roll before it is spread.
- Sewing: six lines, Tex-60 topstitch on stretch and Tex-80 on rigid, in-line checks every 50 pcs.
- Laundry: four lines running 12 stock recipes, from a clean rinse to an overdye, at 300–600 pieces per drum.
- Finishing: trimming, hardware check, metal detection tested at the start of each shift, pressing and packing.
The figures we plan your delivery date against.
- Site: 12,000 m² in Xintang, Zengcheng District, Guangzhou
- Cutting: 8-layer cutting table, marker nested per size run
- Sewing: Six lines, 180 staff across cutting, sewing, laundry, finishing and QC
- Laundry: Four lines, 12 in-house recipes, 300–600 pcs per drum
- Monthly capacity: 80,000 pcs
- Daily capacity: About 3,000 pcs on a working day, planned backwards from your delivery window
- Fabric stock: 9–14.5 oz denim held in house for first orders and reorders
- Finishing: Metal detection, pressing, packing to your carton mark
- Shipping: FOB Guangzhou or your forwarder; CIF and DDP quoted on request
- Audits: AQL 2.5 final inspection, third-party inspection welcome with five working days' notice
Send three dates that suit you. We confirm within one working day and block the sewing line you want to see so the floor is running, not being tidied for a tour.
A walk-through takes about two hours: fabric store, cutting, one sewing line, laundry, finishing and the inspection desk. Bring your auditor, your tech pack or the sample you are trying to match.
If you cannot travel, we run the same route on a video call and send the footage afterwards, including the metal detector being tested.
- Give us two working days' notice so the relevant line is in production
- Third-party inspectors are welcome; we stage the goods and share the report
- Video walk-through available the same week for overseas buyers

From the floor to FOB Guangzhou
Once bulk is approved, cutting, sewing and laundry run in one sequence in this building. Finished pieces go to finishing for trimming, hardware check, metal detection and pressing, then into packing against your carton mark.
Packing lists and the shipping mark are confirmed before the cartons are sealed, so the goods move to the port without a second label job. We ship FOB Guangzhou as standard; CIF and DDP are quoted with your forwarder or ours. Bulk production runs 25–35 days after PP approval, which is the date we plan the visit around.
Send three dates and the line you care about. We will answer with a time, a name and the route through the building.
How do I book a factory visit?
Send three dates at least two working days ahead. We confirm the slot and the line you will see, and send the address in Xintang with the contact name at the gate. A walk-through takes about two hours.
Can I bring a third-party inspector?
Yes. Inspectors are welcome during production and at final inspection, at your cost. Give us five working days' notice so the goods are packed and staged rather than waiting on a carton line.
What is the minimum I can see on a visit?
There is no minimum order to visit. If you want to see bulk in motion rather than a quiet floor, come while a 300 pcs or larger run is in sewing — we will tell you the honest window.
How long does a factory audit take?
Two hours for the floor walk, or a full day if your auditor wants to review records, measurement sheets and the last AQL 2.5 report in detail. Video walk-throughs take about 45 minutes.
Can I buy fabric only, without garments?
Yes, in full rolls from our 9–14.5 oz stock range. Fabric-only orders are quoted separately from garment production and do not carry the 300 pcs garment minimum.
Tell us what you want to make
Share the style, target quantity and launch date. You get fabric options, wash recommendations, a sampling date and a factory-direct quote — usually within 12 working hours.