Skip to content

Custom Jeans Manufacturing for Brands That Specify Everything

OEM custom jeans from 300 pcs per style: your pattern or ours, 12 oz to 14.5 oz denim, 12 in-house washes, sampling in 7–10 days and bulk in 25–35.

Denim style from our production range

Custom jeans manufacturing means we cut your pattern, to your measurements, with your hardware and label — not that you pick a style number from a catalog.

You send a tech pack, a graded measurement chart or a sample garment. We return a costed counter-sample in 7–10 working days, then run bulk in 25–35 days once the pre-production sample is signed.

  • Your pattern kept on file — reorders skip pattern development
  • 6 sewing lines, 180 staff, 80,000 pcs per month
  • Wash, hardware, label and packaging changed per order without a new block
Send your tech pack
Denim style from our production range
Six lines, one building, no subcontracted wash

Cutting, sewing, washing and finishing sit inside 12,000 m² in Xintang. Fabric arrives on Monday, is cut by Wednesday, sewn in cells of 24 operators, and washed in our own drums — so a wash correction is a phone call, not a shipping delay.

Each order runs with a named merchandiser, a printed routing sheet and an in-line check every 50 pcs. Defects found at the 50-pc check cost a re-sew; defects found after packing cost you a chargeback.

  • Cutting: 8-layer lay, marker nesting to 87% fabric utilization
  • Sewing: single-piece flow, 45–60 pcs per operator per day on jeans
  • Washing: 4 lines, 12 stock recipes, 300–600 pcs per drum batch
  • Finishing: thread trim, metal detection, AQL 2.5 inspection
Where we refuse the order

We turn down work when a measurement chart is copied from a competitor without a wear test, when the destination market needs nickel-free hardware and the buyer has not specified it, and when a wash is approved from a screenshot.

Those three refusals cost us orders. They also explain why 68% of our clients reorder within 12 months: the second shipment matches the first, and the third does not arrive with a shade complaint.

  • AQL 2.5 final inspection, plus a 100% measurement check on the first 50 pcs
  • Shade band check against the approved standard on every roll and every drum
  • Metal detection on every finished garment before packing
  • Third-party inspection (SGS, BV, Intertek) welcomed and scheduled by us
Denim style from our production range
Program parameters
  • MOQ: 300 pcs per style per color
  • Order multiple: Any mix of sizes within a color, 12 pcs minimum per size
  • Fabric sourcing: Our stock range or buyer-supplied fabric (we inspect on receipt)
  • Pattern ownership: Buyer owns the pattern; we keep it on file for reorders
  • Sampling fee: Charged per style, credited against bulk above 1,000 pcs
  • Payment terms: 30% deposit, 70% against bill of lading
  • Incoterms: FOB Guangzhou, CIF, DDP on request
  • Documentation: Commercial invoice, packing list, CO, test reports on request

When custom manufacturing is the wrong answer

If you are testing a fit for the first time, need 100 pieces to validate a design, or want to sell in three weeks, custom production will cost more than it returns. Start from our stock wash range and a proven block, test the market, then move to a custom pattern once a style has sold through.

The economics only work when a style repeats. A custom pattern costs one sample round and a grading job; spread across 300 pcs it is a meaningful per-unit cost, spread across 3,000 pcs it disappears. That is the point at which buyers usually move from stock to custom.

  • Under 300 pcs per style: start with a stock block and a stock wash.
  • 300–1,000 pcs: custom wash, stock pattern, custom labels.
  • 1,000+ pcs: custom pattern, custom wash, custom hardware and packaging.
Frequently asked questions
Do you make jeans from a buyer's own pattern?

Yes — that is the standard OEM route. Send a DXF, a graded measurement chart or a physical sample we can reverse-engineer. We digitize and grade the block, then confirm the measurement chart in writing before any fabric is cut.

What is the minimum order for a fully custom jean?

300 pcs per style per color for a custom pattern with a stock wash recipe. A new wash developed from your swatch carries the same 300 pc minimum but adds 3–5 days to sampling.

Can you produce under my label only?

Yes. Private label means our block, your labels, patches and packaging. It is the fastest route to market: no pattern cost, 7–10 day sampling, and a lower unit price at 300–600 pcs because the pattern already exists.

How do you handle fabric supplied by the buyer?

We inspect incoming rolls for shade, width and shrinkage, and we cut a test garment before bulk. Buyer-supplied fabric that fails inspection is reported with photos and a shade band measurement within 48 hours of arrival.

What are your payment and shipping terms?

30% deposit on order confirmation, 70% against the bill of lading. FOB Guangzhou as standard; CIF and DDP quotes on request. Production slots are held for 7 days from quotation, after which the calendar is re-checked.

Tell us what you want to make

Share the style, target quantity and launch date. You get fabric options, wash recommendations, a sampling date and a factory-direct quote — usually within 12 working hours.

Need a quick answer?

Message our merchandising team on WhatsApp — we reply within 12 working hours.

WhatsApp +86 138 0000 0000