Skip to content

Jeans Fit Development From POM Chart to Wear Test

Jeans fit and grading: a 24-point POM chart, 5-piece fit set, 1-inch grade increments and a 3D fit check before your first bulk cut.

Denim style from our production range

A fit is a measurement chart plus a wear test, not a size label. We build a POM chart with 24 points of measure, cut a 5-piece fit set across the grade, and run two fit rounds before a block is released to production.

Grading moves 1 inch at the waist, 1 inch at the hip and 1 inch at the inseam per size, with different rules above the plus-size break. Get the crotch curve wrong by 5 mm and the jean photographs badly on every body.

  • 24-point POM chart, measured on a flat table
  • 5-piece fit set across the size range
  • 1 inch grade at waist, hip and inseam; 1.5 at plus size
  • 3D fit check before the first physical sample
Send a fit sample
Denim style from our production range
The five points that decide whether a jean fits

Waist, hip, front rise, back rise and thigh. Those five decide 80% of fit complaints, and they are the first five rows of the POM chart. Knee, leg opening and inseam change the silhouette but rarely generate a return on their own.

We measure every sample on a flat table at a fixed tension, record relaxed and stretched waist, and compare against the chart before it ships. A 1 cm discrepancy is corrected in the pattern, not hidden in the sample notes.

  • Waist relaxed and stretched, 2 kg tension
  • Hip at 4 cm below the waistband seam
  • Front and back rise measured on the curve
  • Thigh measured 2.5 cm below the crotch
Why the second sample is the one that ships

The first sample proves the pattern; the second proves the grade. We cut the first round at the middle size, fit it on a model, then cut the ends of the range to check that the grade does not distort the pocket position or the yoke.

A wear test follows: 10 wearers, 2 weeks, 3 home washes. We record waist recovery, knee bagging, twist at the outseam and shrinkage. Those four numbers, not the fit photo, decide whether the block is released.

  • First round at the middle size, second at both ends of the grade
  • Wear test with 10 wearers over 2 weeks
  • Waist recovery and knee bagging measured after 3 washes
  • Outseam twist checked against the grain line
Denim style from our production range
Fit and grading parameters
  • POM chart: 24 points of measure, flat-table method
  • Fit set: 5 pieces across the size range
  • Grade increments: 1 inch waist, hip and inseam per size
  • Plus-size grade: 1.5 inch hip and 1 inch waist above size 16
  • Rise options: Low 24 cm, mid 26–28 cm, high 30 cm at size 32
  • Fit rounds: 2 before block release, 3 for plus size
  • 3D fit: Avatar scan and tension map before the first sample
  • Wear test: 10 wearers, 2 weeks, 3 home washes
  • Shrinkage allowance: 2–3% warp, 1–2% weft built into the pattern
  • Sampling: 7–10 working days per round
  • Bulk: 25–35 days after PP approval

What a fit round actually buys you

A fit round is 10 wearers, 2 weeks and 3 washes, and it is the cheapest place to find a 1 cm crotch error. The same error found after 3,000 pairs are cut is a markdown, a re-cut, or a return rate that runs 8–12% on the style. A 1 cm error at the crotch reads as a bad fit on every size in the grade.

The trade-off is calendar. Two fit rounds plus a wear test add 3–4 weeks before bulk. Skipping the wear test and approving from a fit model saves that month, but it also skips the only check that catches shrinkage and recovery after washing, the two variables that decide whether the jean still fits in week six.

  • New brand, first block: 2 rounds plus a wear test, 3–4 extra weeks.
  • Proven block, new color: 1 round, 7–10 days.
  • Plus size: 3 rounds, separate grade rules above size 16.
Frequently asked questions
What is a POM chart in jeans production?

A points-of-measure chart lists every measurement a sample is checked against: waist relaxed and stretched, hip, front and back rise, thigh, knee, leg opening, inseam and pocket placement. Ours has 24 points, measured on a flat table at fixed tension, and it is signed before cutting.

How many samples are in a fit set?

Five pieces across the range, usually sizes 28, 30, 32, 34 and 36 for men, or 24–32 for women. The middle size is fitted first, then both ends, so the grade is checked where it is most likely to distort the pocket and yoke.

What are standard jeans grade increments?

1 inch at the waist, 1 inch at the hip and 1 inch at the inseam per size for misses and men's. Plus-size blocks switch to 1.5 inches at the hip above size 16. Rise grades 0.5 inch per size, and the crotch curve is redrafted rather than scaled.

Do you use 3D fit technology?

Yes. We scan the block on an avatar and read a tension map before cutting a first sample, which catches most crotch and armhole problems without fabric. It does not replace a wear test: drape, recovery and shrinkage still need 10 wearers and 3 washes.

How long does jeans fit development take?

7–10 working days per round, with two rounds plus a 2-week wear test before bulk. A brand that already has a proven block and only changes color needs one round. A new plus-size block needs three rounds and about 5 extra weeks in total.

Tell us what you want to make

Share the style, target quantity and launch date. You get fabric options, wash recommendations, a sampling date and a factory-direct quote — usually within 12 working hours.

Need a quick answer?

Message our merchandising team on WhatsApp — we reply within 12 working hours.

WhatsApp +86 138 0000 0000