Skip to content

Embroidery and Print That Survives the Wash Cycle

Denim embroidery and printing: 12-head machines, 6,000–15,000 stitches per pocket design, discharge or plastisol print, 7–10 day samples.

Denim style from our production range

Embroidery and print are how a plain jean becomes a brand. A back-pocket design runs 6,000–15,000 stitches on a 12-head machine. A print on the leg is either discharge, which removes indigo, or plastisol, which sits on top of it.

We digitize from your artwork, sew a strike-off on your actual denim, and approve color and placement before bulk. A 12-head machine sews 12 pockets at once, which makes a 1,000 pc order a 2-day job and a 20,000 pc order a scheduling question.

  • 12-head machines at 700–850 stitches per minute
  • 6,000–15,000 stitches per back-pocket design
  • Puff, flat, appliqué, chain stitch and chenille
  • Discharge, plastisol, water-based and foil print
Send artwork for a quote
Denim style from our production range
Digitizing decides the hand-feel

A stitch file is not a picture. Underlay, pull compensation, density and stitch angle decide whether a 2 mm line reads sharp or blurs into the twill. On stretch denim we add a second layer of cut-away backing; on rigid 13.5 oz, a tear-away is enough.

Puff embroidery uses a foam core under the top thread: 2–3 mm of foam lifts the design 3–4 mm off the cloth. It photographs well and crushes in a polybag. Flat embroidery sits at 0.5–1 mm and survives folding, which is why most pocket logos are flat.

  • Digitizing in 1–2 days, with a sew-out on your denim
  • Pull compensation 0.2–0.4 mm on stretch denim
  • Cut-away backing for stretch, tear-away for rigid
  • 40-weight polyester or rayon thread, Pantone matched
Registration, puckering and the 30-wash test

Registration is measured against the pocket pattern, not the artwork: a 3 mm shift on a 90 mm logo is visible at retail. We check the first 50 pcs against a marked template, then every 100th piece through the run.

Puckering comes from too much density on too little backing, or from sewing a stretch denim without stabilizing it. The test is a 30-home-wash cycle: if the design cracks, cups or lifts at the edge, the file goes back to the digitizer before bulk.

  • Placement tolerance of ±3 mm against the pocket template
  • First 50 pcs checked, then every 100th
  • 30 home washes before a print or embroidery is approved
  • Crock and wash-fastness tested on the first batch
Denim style from our production range
Decoration parameters

Confirmed on the strike-off before screens or files are released.

  • Machines: 12-head embroidery, 700–850 stitches per minute
  • Stitch count: 6,000–15,000 per back-pocket design
  • Stitch types: Flat, 3D puff, appliqué, chain, chenille
  • Puff height: 2–3 mm foam, 3–4 mm finished lift
  • Backing: Cut-away for stretch, tear-away for rigid
  • Print methods: Discharge, plastisol, water-based, foil
  • Plastisol cure: 150–160°C for 60–90 seconds
  • Placement tolerance: ±3 mm against the pocket template
  • Durability: 30 home washes with no cracking or lift
  • Thread: 40-weight polyester or rayon, Pantone matched
  • Sampling: 7–10 working days
  • Bulk: 25–35 days after PP approval

Puff versus flat, discharge versus plastisol

Choose puff when the design needs to read from three meters and the garment will be photographed flat. Choose flat when it will be folded, stacked or shipped in a polybag, because foam crushes and does not recover. Puff also adds 1–2 minutes of machine time per piece and a foam layer that shifts if the backing is wrong.

On print, discharge gives the softest hand because it bleaches the indigo rather than covering it, but it works only on indigo, not on sulfur black, and the color range is limited to what the base cloth can give. Plastisol covers anything and holds a bright Pantone, but it cracks at the edges after 20–30 washes if the cure runs 10°C short. The trade-off is a wash-and-cure step against a shorter print cycle.

  • Photo shoot or a bold look: 3D puff on rigid denim.
  • Fold-and-ship retail: flat embroidery at 0.5–1 mm.
  • Soft hand on indigo: discharge. Bright color on black: plastisol.
Frequently asked questions
How many stitches should a back-pocket logo have?

6,000–15,000 stitches covers most pocket logos. Under 4,000 the line reads thin after washing; over 18,000 the pocket stiffens and puckers unless the backing and density are adjusted. We quote from the stitch count, so a simpler file is also a cheaper one.

Can you embroider on stretch denim?

Yes, with two changes: a cut-away backing rather than tear-away, and 0.2–0.4 mm of pull compensation built into the file. Without them the design cups and the stretch dies around the stitching. We test on your fabric before quoting the run.

What is the difference between discharge and plastisol print?

Discharge uses a chemical to remove indigo, so the print sits in the cloth with no hand-feel, but it only works on indigo and limits color. Plastisol sits on top, holds any Pantone and covers black, at 0.1–0.3 mm thick, and needs a 150–160°C cure to survive washing.

Will the print crack after washing?

Not if it is cured correctly: we test 30 home washes before approval. Plastisol cured below 150°C cracks at the edges within 20–30 washes. Discharge does not crack, but it can ghost back if the neutralization is incomplete, so both routes are wash-tested.

How long does embroidery sampling take?

7–10 working days from approved artwork, including digitizing, a sew-out on your denim and a placement sample. Complex designs with more than three colors or appliqué add 1–2 days for a second sew-out before the sample ships. Book the sample with the trim order so the timing holds.

Tell us what you want to make

Share the style, target quantity and launch date. You get fabric options, wash recommendations, a sampling date and a factory-direct quote — usually within 12 working hours.

Need a quick answer?

Message our merchandising team on WhatsApp — we reply within 12 working hours.

WhatsApp +86 138 0000 0000