Selvedge denim is woven on a narrow shuttle loom at 12–14.5 oz with a finished edge, and it is rigid: unsanforized cloth shrinks 5–8% in the warp. Stretch denim is 9–11 oz with 1–3% elastane on a 150–160 cm projectile loom, shrinks 1–2% and recovers 95–98% after a day of wear.

In money, that is a USD 7–14 per meter fabric against USD 2.60–4.50, which frames the whole decision before either jean reaches the cutting table.

What the loom changes before the fabric reaches the cutting table

A shuttle loom is 76–91 cm wide and runs at 2.5–3.5 m per minute. A modern projectile or rapier loom is 150–160 cm wide and runs at 60–90 m per minute, so one machine replaces the output of 20–30 shuttle looms. That ratio is the reason selvedge costs what it does, and no amount of buying volume changes it.

Width decides pattern geometry. On 80 cm denim you fit two leg panels side by side and the outseam falls on the selvedge edge, so no overlock is needed and the jean cannot be cut wider than about a 38 waist. On 150 cm denim you nest 4–6 panels per lay and grade to a 46 waist without changing the fabric. A selvedge style above a 38 waist usually means a seam where the buyer did not want one.

Consumption follows: 2.6–3.2 m of selvedge per jean against 1.4–1.6 m of stretch denim. Two thirds more fabric at roughly 2.7 times the meter price is how a USD 12 jean becomes a USD 30 jean.

Weight, hand and how each fabric ages

Weight is the number buyers quote and rarely convert. One ounce per square yard is 33.9 g/m², so the range that matters reads like this:

  • 9 oz — 305 g/m². Light stretch denim for summer five-pockets and women's skinny fits.
  • 11 oz — 373 g/m². The volume stretch weight: holds a crease, recovers well, sells in every market.
  • 12 oz — 407 g/m². Rigid selvedge entry point and the standard rigid five-pocket weight.
  • 14.5 oz — 492 g/m². Heavy selvedge that stands away from the leg for the first 20 wears and then softens.

Selvedge is a 3/1 twill, rope-dyed in indigo so the core stays white, which is why it fades along the seam and the knee rather than all over. Stretch is usually a 3/1 twill with a core-spun elastane yarn, dyed to a flat shade, and it fades evenly and slowly. After 3 washes a 12 oz selvedge jean has lost 15–20% of its depth; an 11 oz stretch jean has lost 5–8%.

Shrinkage and recovery: the numbers behind fit approval

This is where a buyer loses money, because shrinkage shows up after the customer has worn the jean twice and washed it once.

Warp shrinkage

Unsanforized selvedge shrinks 5–8% in the warp and 3–4% in the weft on the first wash. On an 80 cm inseam, 6% is 4.8 cm — a size and a half. Sanforized selvedge is 2–3%. Stretch denim is 1–2% and mostly stabilised in finishing.

Stretch recovery

Good stretch denim returns to 95–98% of its original hip measurement after 8 hours of wear. Below 95% the jean belongs to the sofa. Bagging at the knee runs 0.5–1.5 cm after 30 wears, and it is the number your returns data will show first.

The 5-wash test

Wash 3 pairs 5 times at 40°C, tumble low, and measure the eight POMs after wash 1 and wash 5. Selvedge should be stable from wash 3; stretch should not move more than 1 cm at the hip between wash 1 and wash 5.

Cost per meter and cost per jean

The fabric line is where the two products separate, and it is worth seeing the arithmetic in full before you set a retail price.

  • Selvedge fabric: 2.6–3.2 m at USD 7–14 per meter is USD 18–45 of fabric per jean. Add labour, wash, hardware and freight and the typical FOB range is USD 24–48.
  • Stretch fabric: 1.4–1.6 m at USD 2.60–4.50 is USD 3.60–7.20 per jean, with a typical FOB range of USD 10–15.
  • Mill minimums: selvedge often ships in 500–1,000 m lots. A 300 pc run needs 780–960 m, so you buy 1,000 m and carry 40–220 m of dead stock — USD 400–2,200 sitting on a shelf at USD 10 per meter.
  • Wash: selvedge usually gets a rinse or a 1-drum stone at USD 0.45–0.60 per pair; stretch gets a tint or enzyme at USD 0.55–0.90, from the same 12 recipes.

The dead-stock line is the one buyers forget. Selvedge looks like a 2.7 times fabric cost; on a 300 pc run with a 1,000 m mill minimum it is closer to 3.1 times, unless the mill has the shade in stock.

What each customer expects when the parcel arrives

Selvedge buyers are a smaller market with lower return rates. They expect 5% shrink, indigo transfer on a white couch for the first month, and a waist that relaxes 1–2 cm after two weeks. Tell them to buy their measured waist and they reorder. Tell them nothing and they return the jean as faulty.

Stretch buyers expect a jean that fits the same at 8 am and 8 pm. They notice bagging at the knee, a waistband that rolls, and a thigh that has grown half a size by Friday. For that customer, 2% elastane with 97% recovery beats 3% elastane with 94%, and the second fabric is usually the cheaper one on the quote.

Retail math separates the two further. A selvedge jean at USD 26 FOB lands near USD 31 with US duty and freight, so a USD 120 price is a 3.8 times markup. A stretch jean at USD 12 FOB lands near USD 15, so USD 65 retail is a 4.3 times markup — and that is where most of the unit volume sits.

Care instructions you can print on the label

Care text is part of the product for both fabrics, and the difference is not cosmetic: a hot wash destroys the recovery of a stretch jean and the fit of a raw selvedge jean in one cycle.

  • Machine wash cold at 30°C, inside out, with a mild detergent and no fabric softener — softener coats elastane and cuts recovery by 2–3% per wash.
  • Hang dry or tumble low. A tumble dry on high shortens a stretch jean by 1–2 cm at the inseam within 10 cycles.
  • Raw selvedge: first soak 40 minutes in cold water, hang dry, then wear. That removes 3–5% of the shrink before the customer measures it.
  • No bleach on either fabric; it attacks indigo and the elastane core at the same time.
  • Wash stretch after 3–4 wears, selvedge after 8–10, and say so on the hangtag.

Which buyers should choose which

There is no correct answer in the abstract, only a correct answer for your price point, your customer and your reorder cycle.

  • Choose selvedge if you sell above USD 120 retail, your customer reads the label, and you can carry 40–220 m of dead stock without it hurting. Works at 300–600 pcs per style, in two or three washes, sizes 28–38.
  • Choose stretch if you need a size run to 46 waist, a reorder every 8–10 weeks, and a price that survives a 2.5 times markup. Works at 600–3,000 pcs, in 9–11 oz, with 2% elastane.
  • Choose both as a two-style capsule: one 12 oz rigid selvedge hero at 300 pcs and one 11 oz stretch volume style at 1,200 pcs. It is the most common first range we cut.

Our raw selvedge denim range runs the narrow-loom cloth at 12–14.5 oz, the women's jeans range carries the 9–11 oz stretch fits, and the wash house runs both through the same 12 recipes with AQL 2.5 inspection at the end.

If you are still deciding on the fabric before the fit, the denim fabric weights guide lists what each weight does on a body, and the MOQ and cost breakdown shows what each choice does to your landed cost.

Next step

Send the fabric weight, the stretch percentage and the size range you want to sell. You get a counter-sample in 7–10 working days, a bulk date 25–35 days after approval and a quote at 300 pcs per style per color for either cloth. Start at contact us.