Denim weight is the mass of one square yard of greige cloth, and it decides how a jean drapes, how it fades and what it costs to ship. This guide converts ounces to GSM, maps 6–15 oz to real garments, and lists the numbers to put on a tech pack so the mill and the factory cannot guess.
Weight alone moves FOB by USD 1.50–3.50 per pair between 9 oz and 14.5 oz, and adds 0.3–0.4 kg per pair to freight weight.
Ounces, GSM and what the number measures
One ounce per square yard is 33.9 grams per square meter, so a 12 oz denim is roughly 407 GSM. Mills in China quote GSM, US and Japanese mills quote ounces, and a buyer who mixes the two ends up approving the wrong cloth.
- 6 oz = 203 GSM — shirting, kids' jeans, summer shorts
- 8 oz = 271 GSM — women's stretch skinny, kids, lightweight wide-leg
- 9 oz = 305 GSM — men's stretch denim, women's rigid
- 10.5 oz = 356 GSM — the common stretch weight for men's slim and straight
- 12 oz = 407 GSM — the standard rigid five-pocket jean and raw selvedge
- 13.5 oz = 458 GSM — baggy, carpenter and utility fits
- 14.5 oz = 492 GSM — heavy workwear and reproduction denim
- 15 oz = 509 GSM — jackets and the heaviest raw jeans
Mills hold a ±5% weight tolerance, so a 12 oz roll can arrive at 11.4 oz and still be within contract. If the hand-feel matters, specify the GSM band in the tech pack, not just the ounce figure.
6 to 15 oz: what each weight is for
The weight has to match the fit and the season, and the most common spec error is a heavy cloth on a soft silhouette. A wide-leg jean in 14.5 oz stands away from the body like cardboard; the same pattern in 9 oz falls into the drape the reference photo showed.
- 6–7 oz: denim shirts, kids' jeans and summer shorts. Light enough to needle without puckering, and it takes a soft rinse well.
- 8–9 oz: women's skinny and straight, kids' bottoms and men's summer weights. Stretch versions at 8 oz hold a close leg line without cutting in.
- 10–11 oz: the volume weight. Men's slim, straight and relaxed fits, women's rigid wide-leg, and most DTC first collections.
- 12 oz: the rigid standard. Raw selvedge, stone-washed straight legs, and the cloth most buyers mean when they say a real jean.
- 13.5–14.5 oz: baggy, carpenter and workwear silhouettes, where the cloth is meant to hold a shape and fade hard at the creases.
- 15 oz and up: jackets, overshirts and reproduction jeans for a buyer who wants a break-in period of 4–8 weeks.
Season and market shift those numbers by half a step. A UK buyer's summer range runs 9–10.5 oz, a German workwear buyer will not look at anything under 13.5 oz, and a Japanese-inspired label asks for 14.5 oz raw with a shorter inseam because the cloth will not stretch into length. Match the weight to the market before matching it to the mood board.
Stretch versus rigid at the same weight
A 10.5 oz denim with 2% elastane feels close to an 8 oz rigid on the body, because the cloth moves with the wearer instead of resisting. That is why a 300 pcs run in stretch often fits a size range that a rigid cloth of the same weight cannot cover.
Stretch costs more in three places. The yarn is 8–12% dearer, the finishing needs a heat-set to stabilize recovery, and the return rate climbs when recovery drops below 90% after 20 home washes. Ask for the growth figure, not just the elastane percentage: 1–2% growth after 3 washes is acceptable, and 4% means the knee bags out by lunchtime.
Test it before bulk, not after. Cut two sample legs from the same pattern, one in 10.5 oz stretch and one in 12 oz rigid, and put both on a fit model for 20 minutes. The stretch leg measures 0.5–1 cm narrower at the thigh without feeling tight, which is usually the gap between a jean that photographs well and one that comes back.
Shrinkage and sanforizing
Unsanforized denim shrinks 8–12% in the warp and 3–5% in the weft on the first wash. Sanforized denim is mechanically compressed to a residual 1–3%, and a garment wash takes another 1–2% out before it reaches the customer.
Put a number in the tech pack: 3% maximum shrinkage after 3 washes at 40°C, measured warp and weft, and state the test method. A factory that answers with a percentage but no method is quoting a memory. The cost of sanforizing is real — USD 0.20–0.40 per meter — and it is cheaper than a size run that comes back 2 cm short after the first wash.
Twill direction and selvedge width
Most denim is a 3/1 right-hand twill: the diagonal runs up to the right, which is what gives the surface its familiar line and the fades their direction. Left-hand twill appears in reproduction and some Japanese cloth, and broken twill — no clear direction — shows up in 1970s-style denim and in cloth that is meant to fade evenly.
Direction also changes how a pair fades. A right-hand twill fades on a diagonal that runs one way around the leg, so whiskers and honeycombs read as one line; a left-hand twill runs against it and the same sanding pattern looks broken. That is a design decision and a production one — an operator used to right-hand twill will sand a left-hand pair differently unless the standard is photographed.
Selvedge width decides your cutting efficiency. A shuttle loom runs 30–34 inches wide, so a selvedge jean needs 1.4–1.7 m of cloth per pair with 75–82% utilization; a wide loom at 58–64 inches nests at 85–88%. That gap is why selvedge denim at 12 oz carries a typical FOB range of USD 18–28 per pair while the same jean in a wide-loom 12 oz sits at USD 12–19.
How weight changes fit, sewing and freight
Three operational consequences follow from a 3 oz step up in cloth, and each has a number attached.
Fit and drape
A 12 oz jean holds a pressed crease and a defined break at the hem; a 9 oz jean of the same measurements collapses into a softer stack that reads 1–2 cm longer. If you approve a fit on 9 oz and run bulk in 12 oz, the leg opening looks tight and the inseam looks short, and your measurement chart is technically correct.
Sewing and throughput
Heavier cloth needs a size 18–20 needle against a 16 on 10 oz, a longer stitch length, and more pressure at the feed. Operators sew 45–60 pcs per day on 12 oz against 60–70 on 9 oz, so the same order takes 15–20% longer on the floor and the sampling date has to account for it.
Freight and unit cost
A 12 oz pair carries about 0.92 kg of purchased cloth and a 14.5 oz pair about 1.11 kg. On 900 pcs that is 171 kg more cargo, plus higher fabric cost at the same meter price. Air freight is where it bites: at USD 4–7 per kg, 0.19 kg extra is USD 0.76–1.33 a pair before anything else changes.
What to put on the tech pack
Six lines stop the guessing, and every mill and factory reads them the same way.
- Weight: ounces and GSM, with a ±5% band, plus the finished garment weight if you have it.
- Composition: cotton percentage, elastane percentage by type (2% vs 3% changes recovery), and any recycled content with its certification.
- Shrinkage: maximum percent after 3 washes at 40°C, warp and weft stated separately, with the test method named.
- Construction: twill direction (3/1 right-hand, left-hand or broken), yarn count, and whether the cloth is rope-dyed or slasher-dyed.
- Width and edge: usable width in inches, selvedge or fringed, and the mill roll length so cutting can plan the lay.
- Finish: sanforized, mercerized, singed, or garment-washed, and the hand-feel in plain words — dry and papery, or soft with loft.
Add the shade standard: a physical swatch, a Pantone number for the ground, and the wash recipe number if the finish is already agreed. Two buyers can order the same 12 oz cloth and get 2 different jeans because one specified the finish and the other did not.
Next step
Send your target weight, composition and fit reference through our contact page and we will send back 2–3 fabric options with GSM, shrinkage figures, mill width and a typical FOB range within 2 working days. Buyers weighing raw selvedge against stretch can also compare the two on our raw selvedge denim page before choosing a direction.