Skip to content

Denim Fabric Sourcing for Brands That Need Every Roll to Match

Denim fabric sourcing in China from 9 oz to 14.5 oz: selvedge mills, BCI and recycled cotton, shade bands within 0.5 and shrinkage under 3%.

Denim style from our production range

Fabric is 60–70% of a jean's landed cost, so the sourcing decision sets your margin before a single seam is sewn. We buy from mills in Guangdong, Japan and Turkey, hold 9 oz to 14.5 oz denim in stock, and quote fabric as a separate line from cutting and sewing.

Every roll is read on arrival: width, shade against the approved band, stretch recovery and shrinkage after three washes. A roll that misses the band is quarantined the same day and photographed for you before it goes near a cutting table. That split matters when a quote looks cheap: the sewing price is visible, and so is the fabric behind it.

  • 9–14.5 oz in rigid, stretch, black and selvedge
  • Shade band held to 0.5 across every roll in an order
  • BCI cotton and GRS-certified recycled cotton on request
  • Shrinkage controlled under 3% after three home washes
Send your fabric spec
Denim style from our production range
One dye lot, one order

A 3,000 pc order rarely comes from a single roll. We reserve one dye lot for the whole run at the mill, hold 8% extra for re-cuts, and cut the darkest rolls first so carton 40 matches carton 1 under daylight. If the mill cannot hold that lot, we tell you before the deposit rather than after the first cut.

Selvedge is bought by the roll, not by the meter. A 30-meter roll of 14.5 oz selvedge yields about 11 pairs, so we quote the real yield before you commit. Offcuts become pocket bags and patches instead of waste.

  • One roll minimum per color, 60–110 m depending on weight
  • Shade read on every roll against the signed standard
  • Three-wash shrinkage test before release to cutting
  • Fiber content sheets and test reports on request
Fabric and shade references

Rolls and washes from current production.

Denim finish from our laundry
Denim finish from our laundry
Denim finish from our laundry
Denim finish from our laundry

What to specify before you buy fabric

Give the mill weight, composition, weave and finish, then add the two numbers most buyers leave out: shrinkage after wash and shade tolerance. A 12 oz rigid denim that shrinks 8% will size out of your chart after the first home wash; one held under 3% keeps the measurements you approved.

Buy the test, not the swatch. A half-meter swatch tells you how a fabric feels in the hand; a three-wash test on a full garment tells you whether the leg will twist, the waistband will bubble or the indigo will crock onto a pale sofa. We run that test before bulk and send the numbers with the counter-sample, and we keep the test garments so a reorder can be compared against the fabric that was actually approved.

  • Weight in oz per square yard, not a trade name.
  • Shrinkage after three washes, warp and weft.
  • Shade tolerance in the units your QC team uses.
  • Composition and certificate for every fiber claimed.
Frequently asked questions
Can you source fabric that we specify?

Yes. Send the mill, article number or a swatch and we buy to your specification or find the closest match from the mills we work with. Buyer-nominated fabric is inspected on arrival and cut only after a test garment is sewn.

What is the minimum fabric order?

One roll per color on stock denim, usually 60–110 meters depending on weight. Selvedge ships in 30-meter rolls because that is how the mill winds it, and one roll makes roughly 11 pairs of jeans at a standard size run. One roll is enough to cut a trial color.

How do you hold shade across rolls?

Every roll is read against the signed shade band, and anything outside 0.5 is set aside before cutting. On a multi-roll order we reserve a single dye lot and cut the darkest rolls first, so the last carton matches the first.

Do you offer recycled or BCI cotton?

BCI cotton and GRS-certified recycled cotton are both available, with transaction certificates on request. Recycled content changes the hand and the tear strength, so we test a full garment before quoting the fiber into a style you plan to repeat. Ask for the certificate before the fabric is booked.

How much does fabric add to unit cost?

Fabric is 60–70% of the landed cost of a jean, so a 2 oz change in weight moves the price more than any sewing negotiation. We quote fabric separately so you can see the effect before approving a style, and so a mill price change stays visible instead of buried in a single unit price.

Tell us what you want to make

Share the style, target quantity and launch date. You get fabric options, wash recommendations, a sampling date and a factory-direct quote — usually within 12 working hours.

Need a quick answer?

Message our merchandising team on WhatsApp — we reply within 12 working hours.

WhatsApp +86 138 0000 0000