Fit is decided by eight measurements, not by the number on the label: waist, hip, thigh, knee, leg opening, front rise, back rise and inseam. Approve those eight on a five-piece fit set and a 300 pc run repeats in every size; guess at them and the gap shows up in returns and markdowns.
A 300 pc run typically takes 25–35 days after the pre-production sample is signed, and the fit set behind that signature is 5 pcs measured across 7–10 working days.
The eight POMs that decide how a jean wears
Every pattern room measures the same eight points of measure. They set how a jean sits on a body, and they are the only measurements worth arguing about at fit approval. The tolerances below are what we hold on bulk.
- Waist — flat across the top of the finished waistband, front edge to front edge, ±0.6 cm (1/4 in). One centimeter here is the difference between a jean that closes and one that needs a belt.
- Hip — 8 cm (3 in) below the top of the waistband, across the widest part of the seat, ±0.6 cm. The hip drives the seat, the pocket angle and the yoke depth.
- Thigh — 2.5 cm (1 in) below the crotch seam, straight across, ±0.6 cm. This is the POM your customers complain about first on slim and tapered legs.
- Knee — halfway down the inseam, about 40 cm below the crotch on an 80 cm inseam, ±0.6 cm.
- Leg opening — flat across the finished hem, ±0.6 cm. Half a centimeter here changes the silhouette more visibly than 2 cm at the waist.
- Front rise — crotch seam to the top of the waistband at center front, ±0.5 cm. It decides whether the jean sits at the navel or below the hip bone.
- Back rise — crotch seam to the top of the waistband at center back, ±0.5 cm, and it must run 5–8 cm longer than the front rise or the seat pulls when the wearer sits.
- Inseam — crotch seam to the hem, ±0.6 cm. Keep it constant across the size run when you sell a single length.
How grade rules turn one sample into a 6-size run
A grade rule is the step between sizes. Get the steps wrong and every size except the approved sample is a new fit, which is how a 300 pc order spread over 6 sizes ends up carrying 5 fits nobody has worn.
On men's waist-sized jeans we grade 2.5 cm (1 in) at the waist and hip, 1.3 cm (1/2 in) at the thigh, 0.6 cm (1/4 in) at the knee, the leg opening and the rise, and hold the inseam fixed. Women's sizing moves differently: 2.5–3 cm at the waist, 2.5 cm at the hip, 1 cm at the thigh, 0.6 cm at the knee and 0.5 cm at the front rise per size.
- Waist-to-hip ratio stays constant. A 0.72 ratio at size 28 must still read 0.72 at size 36.
- Thigh grows with the hip. A block graded 2.5 cm at the hip with 0 cm at the thigh gives you a size 40 that will not pass a calf.
- Back rise grows faster than front rise above size 34, by about 0.3 cm per size.
We check all three on a digitized chart before cutting, and the chart ships with the samples so your fit notes and ours describe the same garment.
Five-piece fit sets: why we ship 5 pairs, not 1
One sample proves the pattern. Five prove the grade. We cut fit sets in sizes 28, 30, 32, 34 and 36, or S to XL, in the production fabric and the production wash, and measure all eight POMs on every piece before it ships. A set costs USD 450–600 and takes 7–10 working days; 10–14 working days when the wash is new.
The middle size goes on a body first. If the 32 fits, the useful question is whether the 28 and the 36 fail in the same direction, because that tells you whether the grade rule is wrong or the sample is.
Three tests to run on the fit set
The waistband gap test
Seat the wearer, then measure the gap at center back. More than 2.5 cm means the back rise is short or the waistband curve is too flat for the seat.
The pinch test
You should be able to pinch 2–3 cm of fabric at the thigh on a straight leg and 1–2 cm on a slim. Zero pinch at the thigh is a return waiting for a staircase.
The sit test
Have the wearer sit for 10 minutes, then stand and photograph the knee and the seat. Bagging of more than 1 cm at the knee on a stretch jean points to under 1% elastane or a loose weave.
Wear testing: 14 days, 5 washes, one decision
Before bulk, put 4–6 pairs on real wearers for 14 days with 5 home washes at 40°C. Measure the same eight POMs on day 1, day 7 and day 14. Growth of more than 1.5 cm at the waist means the denim is not stable at that wash temperature; on stretch denim the hip should return to within 2% of its first measurement. Photograph the knee and the seat at each check, because the camera catches bagging that a tape measure misses.
Log each wearer's height, weight and usual jean size. A fit that works on one body shape is a sample, not a size run, and the note costs you two minutes against a 300 pc mistake.
Vanity sizing: what a label buys and what it costs
Labeling a 78 cm waist as a size 30, which measures 76 cm, closes a sale and opens a return. The customer who buys the 30 and the customer who buys the 32 are then both measuring against a chart that is not the garment in the bag.
A consistent 2.5 cm (1 in) of vanity across the run is workable if your size chart says so and every size carries the same offset. An inconsistent one, where the 28 runs true and the 34 runs an inch large, is a grading defect with a marketing excuse. We publish the flat measurement for every size on the chart we sign, so vanity is a decision you make rather than one you discover.
Plus-size grading is a second block, not a scaled-up 32
Above a 40 in waist the grade rule has to change: hip +3–4 cm per size, thigh +1.2–1.5 cm, front rise +0.6 cm, back rise +0.8 cm, and the yoke 1 cm deeper every two sizes. Pocket bags scale about 10%, the waistband needs a stiffer interfacing to stop roll, and two extra POMs go on the chart: thigh at 5 cm below the crotch and knee at the halfway mark.
Our plus-size denim runs on separate blocks for that reason. Scaling a size 32 up by 15 cm gives a jean that fits the hip and cuts the thigh, which is the complaint we hear most in the category.
How to read a competitor reference sample in 20 minutes
Buy two sizes of the jean you want to beat, then measure past the eight POMs.
- Measure 12 points: the eight above plus waistband height, thigh at 5 cm, knee at half inseam and back pocket spacing.
- Cut a 10 cm × 10 cm swatch from the inside hem allowance and weigh it. 4.1 g is 407 g/m², about 12 oz; 3.0 g is closer to 9 oz.
- Count stitches per inch at the side seam. 8–10 SPI is normal; 7 SPI at the crotch is a cost cut you will feel within a month.
- Compare the inside of the waistband with the outside. A much lighter interior means the shade came from spraying or sanding, not from dyeing through.
- Stretch the waistband by hand. More than 3 cm of give on a rigid jean means elastane in the waistband only.
Send us the sample with your measurements and the fit development team returns a chart with the gaps marked. If fabric weight is the open question, the denim fabric weights guide converts ounces to gsm and explains what each weight does to drape.
Next step
Send one fit set, one measurement chart or one competitor sample. You get a graded chart for your size range, a counter-sample in 7–10 working days and a costed quote at 300 pcs per style per color. Start at contact us.